Airbag light on?
- Airbags deployed?
- Diagnostic tool reads “crash data stored” ?
- Dealership tells you that you have a bad module?
- SRS Airbag light came on after accident?
Airbag Module Reset & Return (Like New, Only Better)
your original module is reset and will not need to be coded to your vehicle VIN, since it is original and came out of your vehicle
Dealership told you that you need a new module?
We reset all fault codes. After you receive the module from us you will not have to take it to the dealer for any additional programming. All airbag control modules can be reset and reprogrammed, except if flood, fire or hardware damage.
Even after small accident codes will be stored in the module.
Airbag control module is also known as “sdm, sensor, computer, derm and brain.” We can reset your airbag light and clear any crash codes inside your computer module.
Airbag module reset is $49
This is a Reset and Return service of your existing Airbag Control Module. You will need to remove and send your module to us for reset. We reset all fault codes. After you receive the module from us you will not have to take it to the dealer for any additional programming. All airbag control modules can be reset and reprogrammed, except if flood, fire or hardware damage.
Airbag control module is also known as:
- Airbag Module
- SRS Airbag Control Module
- Restraint Control Module (RCM)
- Sensing Diagnostic Module (SDM)
- Airbag Control Module (ACM)
- SRS Control Module (SRSCM)
SRS Airbag control module needs to be reset if your vehicle was in an accident and the airbag light is on. However, if your vehicle was not in an accident, there are a variety of reasons why your vehicle’s airbag light may turn on. If the vehicle was not in an accident then we recommend that you take your vehicle to a body shop to get it scanned to pull the airbag codes to know what is causing the light to come on.
Step 1 Carefully remove airbag module and seat belts that are locked from your vehicle, if you are not sure then please call the office and or see our technical support videos on removal instructions.
Step 2 Securely pack your item, using the correct box so that your unit cannot be damaged in transit. Take special care when packing
Step 3 Send parts to:
1707 Enterprise Dr
Buford, GA 30518
Include with your part:
- Your Name
- Your Return Address
- Your Phone number, email address
- Year, make and model of vehicle.
Once we receive your part, we will run diagnostic tests to identify the problem. Your part will be reset or rebuilt and sent back to you within 24 hours.
Questions? Call us at 888-779-9029 or submit a request.