How to Remove/Install Instrument Cluster

Speedometer Instrument Cluster Removal Instructions

Depending on the make and model of your vehicle, instructions for the removal of the instrument cluster module vary. Below, you'll find directions for removing an instrument cluster module for the following GM vehicles:

GM Instrument Cluster Removal

This set of instructions can be applied to most GM vehicles, including the Silverado, Tahoe, Trailblazer, Yukon, and Escalade.

  1. First, lower the steering wheel and pull down the gear shifter.
  2. Next, pull the plastic trim that surrounds the instrument cluster off. It should be easy to remove.
  3. Once you've removed the plastic trim, you should be able to see 4 - 7 mm bolts. Remove all four of these bolts.
  4. At this point, you should be able to pull the cluster out easily. Remove any clips that are holding the cluster in place.

Save Hundreds $$$: Send your original part for repair Today!

Start your order today!

Questions? Call us at 888-779-9029 or submit a request.

Was this article helpful?
1 out of 2 found this helpful
Have more questions? Submit a request


Please sign in to leave a comment.